Table of Contents
Advertisement
2-3. Adjusting Color
When displaying in Standard Mode, the "Color" menu of the Adjustment menu allows you to set and save
independent color adjustments for each mode.
Attention
• It takes about 30 minutes (under our measurement conditions) for the performance of electrical parts to stabilize. Please wait
30 minutes or more after the monitor power has been turned on, and then adjust the monitor.
• The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics. Make fine
color adjustment visually when matching colors on multiple monitors.
Note
• The values shown in "K" or "%" are available only as reference.
●
To adjust brightness
The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back
panel).
Setting Range
0 to 100%
Procedure
1. Press
or .
The Brightness menu appears.
2. Use
or
for adjustment.
3. Press
to exit.
Attention
• If the entered value cannot be set, the value will appear in magenta. In such a case, change the value.
Note
• Alternatively, you can use "Brightness" under "Color" in the Adjustment menu to adjust it.
18
Chapter 2 Adjusting Screens
Advertisement
Table of Contents
