To Switch Among Input Signals; To Set Input Signal Selection; Skipping Unused Input Signals - Eizo ColorEdge CS270 User Manual

4-1. To switch among input signals

The input signal switches each time
When the signal is switched, the active input port name appears at the top right corner of the screen.

4-2. To set input signal selection

Settings
Auto The monitor recognizes the connector through which signals are input.
When an external device enters the power saving mode, the monitor automatically displays
another signal.
Manual The monitor displays the signal from the selected connector despite the signal input. Select
the input signal for display using the
Procedure
1. Choose "Tools" from the Adjustment menu, and press
2. Choose "Input Selection" from "Tools", and press
3. Select "Auto" or "Manual" with
4. Press to exit.
Note
• When "Auto" is selected for "Input Selection", the monitor's power saving function works only when all external
devices are in the power saving mode.

4-3. Skipping Unused Input Signals

This function allows skipping of the set input signals when the input signals are switched.
Procedure
1. Choose "Tools" from the Adjustment menu, and press
2. Choose "Mode Skip" from "Tools", and press
3. Use or to select the mode to change, and press
4. Select "-" or "Skip" with
5. Press to exit.
Attention
• You cannot set all the modes "Skip". Set at least one mode to "-".
32
Chapter 4 Connecting Multiple External Devices
is pressed.
Function
or .
or .
operation button.
.
.
.
.
.