Specifying Color Space - Eizo ColorEdge CS270 User Manual

Calibration color lcd monitor
Hide thumbs Also See for ColorEdge CS270:
Table of Contents

Advertisement

2-4. Specifying Color Space

The color space of the input signal can be specified. Set to other than "Auto" if this product cannot display correct
color.
Settings
Auto
Identifies the color space of the input signal automatically.
YUV 4:2:2
Converts the color space of the input signal to a YUV 4:2:2 format.
YUV 4:4:4
Converts the color space of the input signal to a YUV 4:4:4 format.
RGB
Converts the color space of the input signal to an RGB format.
Procedure
1. Choose "Screen" from the Adjustment menu, and press
2. Choose "Color Space" from "Screen", and press
3. Select "Auto", "YUV 4:2:2", "YUV 4:4:4", or "RGB" with
4. Press
to exit.
Attention
• The setting is required when a DVI device is connected to the monitor (at the HDMI connector port) using the DVI-
HDMI conversion connector.
• Even if "Auto" is set, correct color might not be displayed.
Note
• The color space at the DVI input is converted to an RGB format.
See"2-5. Expanding Signal Output Range" (page 25)
24
Chapter 2 Adjusting Screens
Function
.
.
or .
to set the range of input signals.

Advertisement

Table of Contents
loading

Table of Contents