Removing The Seat; Mounting The Seat; Removing The Air Filter - KTM 50 SX Mini Owner's Manual

MAINTENANCE WORK ON THE CHASSIS

Removing the seat

10.17

Mounting the seat

10.18

Removing the air filter

x
10.19
Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
–
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
700479-11
–
Open quick release
–
Pull back the seat and remove it.
300611-10
–
Hook the seat onto screw
Projection
300612-10
–
Close quick release
300611-11
–
Remove the seat. (
M6
and raise the rear of the seat.

and lower the seat at the rear while pushing it forward.

hooks into the fuel tank.

.

p. 33)
.

10 Nm (7.4 lbf ft)
33