MAINTENANCE WORK ON THE ENGINE
–
Remove screw cap
–
Add gear oil until it flows out of the bore of the gear oil level screw.
Gear oil (ATF Dexron 3) (
–
Mount and tighten the gear oil level check screw.
Guideline
Screw, gear oil level check
–
Mount and tighten screw cap
300660-11
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may
result in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
–
Start the engine and check that it is oil-tight.
. Position the motorcycle upright.
p. 80)
M6
.
67
6 Nm (4.4 lbf ft)