KTM 50 SX Mini Owner's Manual page 65

TUNING THE ENGINE
Clutch spring with yellow mark
–
Position the clutch shoe
–
Fit screw
Info
Washer
be fitted consistently on all clutch shoes depending on the clutch
engagement speed.
All clutch springs must be marked with the same color.
301866-11
–
Repeat these steps on the other clutch shoes.
–
Tighten screws
Guideline
Screw, clutch spring
Mortise key (45229021000)
300513-11
.

with spacing washers and spring
 
is used for adjusting the clutch engagement speed and must

with special tool.

.

M6 7 Nm (5.2 lbf ft)
63