Maintenance Work On The Chassis; Raising The Motorcycle With A Lift Stand; Removing The Motorcycle From The Lift Stand; Cleaning Dust Boots Of Fork Legs - KTM 50 SX Mini Owner's Manual

MAINTENANCE WORK ON THE CHASSIS

Raising the motorcycle with a lift stand

10.1
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.

Removing the motorcycle from the lift stand

10.2
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.

Cleaning dust boots of fork legs

10.3
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (59229055000)
The tires should no longer be in contact with the ground.
–
Secure the motorcycle against falling over.
700475-01
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
the left side of the vehicle.
Info
Remove the plug-in stand before riding.
700474-01
–
Raise the motorcycle with a lift stand. (
–
Push dust boots
Info
The dust boots should remove dust and coarse dirt particles from the fork
tubes. Over time, dirt can penetrate behind the dust boots. If this dirt is not
removed, the oil seals behind can start to leak.
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the
brake discs.
700478-11
–
Always keep the brake discs free of oil and grease, and clean them with
brake cleaner when necessary.
–
Clean and oil the dust boots and inner fork tube of both fork legs.
Universal oil spray (
–
Press the dust boots back into their normal position.
–
Remove excess oil.
–
Remove the motorcycle from the lift stand. (

p. 25)
of both fork legs upwards.

p. 83)
into the plug-in stand bracket on
p. 25)
25