Installing The Rear Wheel X - KTM 125 Duke Owner's Manual
Hide thumbs
Also See for 125 Duke:
- Repair manual (267 pages) ,
- Owner's manual (198 pages) ,
- Setup instructions (22 pages)
Table of Contents
Advertisement
13
WHEELS, TIRES
13.4
Installing the rear wheel
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
(Option: With ABS)
–
Remove screw
–
Remove nut
–
Holding the rear wheel, withdraw wheel spindle
adjuster.
–
Push the rear wheel forward as far as possible and take the chain off the rear
sprocket.
–
Pull the rear wheel back and take it out of the swingarm.
B01549-10
x
and pull wheel speed sensor
and the washer. Remove chain adjuster
Warning
Danger of accidents Reduced braking effect caused by damaged brake
discs.
–
Always lay the wheel down in such a way that the brake discs are not
damaged.
Info
Do not operate the foot brake when the rear wheel is removed.
out of the hole.
.
with the washer and chain
113
Advertisement
Table of Contents
