KTM 125 Duke Owner's Manual page 113

13 WHEELS, TIRES
(Option: With ABS)
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
–
Clean and grease the shaft seal rings
Long-life grease (
–
Insert the spacers.
B01392-10
–
Clean the thread of the wheel spindle and screw
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Insert wheel speed sensor
Guideline
Screw, wheel speed sensor holder
–
Mount and tighten screws
–
Take the motorcycle off of the front wheel stand. (
–
Pull the front brake and push down hard on the fork several times to align the fork
legs.
–
Tighten screws
B01391-11
Change the wheel bearing.
x
p. 184)

.

into the hole. Mount and tighten screw
 .
 .
 
and mating surfaces

.
M8 30 Nm
(22.1 lbf ft)
M6 8 Nm (5.9 lbf ft)
p. 77)
111
of the spacers.

.