13
WHEELS, TIRES
Main work
(Option: Without ABS)
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
–
Clean and grease the shaft seal rings
Long-life grease (
–
Insert the spacers.
–
Clean the thread of the wheel spindle and screw
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Operate the hand brake lever repeatedly until the brake linings are in contact with
the brake disc and there is a pressure point.
B00744-10
–
Take the motorcycle off of the front wheel stand. (
–
Pull the front brake and push down hard on the fork several times to align the fork
legs.
–
Tighten screws
Guideline
Screw, fork stub
Change the wheel bearing.
x
p. 184)
.
.
and mating surfaces
.
M8
30 Nm
(22.1 lbf ft)
p. 77)
M8
15 Nm
(11.1 lbf ft)
110
of the spacers.