Loading Envelopes - Canon MG7100 series Online Manual

Hide thumbs Also See for MG7100 series:
Table of Contents

Advertisement

Loading Envelopes

You can load Envelope DL and Envelope Com 10.
The address is automatically rotated and printed according to the envelope's direction by
specifying with the printer driver properly.
Important
Printing of envelopes from the operation panel or from a digital camera is not supported.
Do not use the following envelopes. They could jam in the machine or cause the
machine to malfunction.
- Envelopes with an embossed or treated surface
- Envelopes with a double flap
- Envelopes whose gummed flaps are already moistened and adhesive
1.
Prepare envelopes.
Press down on all four corners and edges of the envelopes to flatten them.
If the envelopes are curled, hold the opposite corners and gently twist them in the
opposite direction.
If the corner of the envelope flap is folded, flatten it.
Important
The envelopes may jam in the machine if they are not flat or the edges are not
aligned. Make sure that no curl or puff exceeds 0.1 inches (3 mm).
Do not flatten the leading edge of envelopes. Otherwise, the printing position may
shift out of place.
2.
Load envelopes.
(1)
Pull out the cassette (lower) from the machine.
127

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents