Changing The Machine Operation Mode - Canon MG7100 series Online Manual

Changing the Machine Operation Mode

If necessary, switch between various modes of machine operation.
The procedure for configuring Custom Settings is as follows:
Custom Settings
1. Open the printer driver setup window
2. Make sure that the machine is on, and then click Custom Settings on
the Maintenance tab
The Custom Settings dialog box opens.
Note
If the machine is off or if communication between the machine and the computer
is disabled, an error message may appear because the computer cannot collect
the machine status.
If this happens, click OK to display the most recent settings specified on your
computer.
3. If necessary, complete the following settings:
Detects a printable disc in the disc tray
Detects whether a printable disc is loaded on the disc tray during disc label printing
and displays a message if a disc is not loaded.
Check this check box to print with detecting whether a printable disc is loaded.
Uncheck this check box to print without detecting whether a printable disc is loaded.
Important
If you leave this check box unchecked, the printer may print to the disc tray even
if a printable disc is not loaded on the disc tray. Therefore, you should check this
check box under normal circumstances.
If you load a printable disc that has already been printed onto the disc tray, the
printer may detect that no printable disc is loaded on the disc tray. In this case,
uncheck this check box.
240