Printing The Nozzle Check Pattern - Canon MG7100 series Online Manual

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print
head nozzle.
Watch the movie
Note
If the remaining ink level is low, the nozzle check pattern will not be printed correctly.
Replace the ink tank whose ink is low.
Replacing an Ink Tank
You need to prepare: a sheet of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Make sure that one or more sheets of A4 or Letter-sized plain paper are
loaded in the cassette (lower).
3. Open the paper output tray.
(1) Holding both sides of the paper output tray, gently open it.
The output tray extension will open automatically when the paper output tray is
opened.
(2) Extend the paper output support.
Important
If the inner cover is open, close it.
4. Print the nozzle check pattern.
(1) Flick the HOME screen, then tap
Using the Operation Panel
The setup menu screen will appear.
(2) Tap Maintenance.
The Maintenance screen will appear.
(3) Tap Print nozzle check pattern.
Setup.
188