Loading Paper Into The Cut Paper Tray - Ricoh MP W7100 User Manual

8. Adding Paper and Toner

Loading Paper into the Cut Paper Tray

• Check the paper edges are aligned at the right side.
• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side
fences may slip out of place.
• When loading a low number of sheets, be sure not to squeeze the side fences in too tightly. If the
side fences are squeezed too tightly against the paper, the edges may crease, thin paper may
wrinkle, or the paper may misfeed.
1. Pulling out the cut paper tray.
2. Release the side lever to the unlocked position.
118
DHJ314
DHJ288