Adjusting The Play In The Throttle Cable; Checking The Clutch Lever Play - KTM 125 Duke Owner's Manual
Hide thumbs
Also See for 125 Duke:
- Repair manual (267 pages) ,
- Owner's manual (194 pages) ,
- Setup instructions (22 pages)
Table of Contents
Advertisement
16
TUNING THE ENGINE
16.2
Adjusting the play in the throttle cable
16.3
Checking the clutch lever play
–
Move the handlebar to the straight-ahead position.
–
Push back sleeve
–
Loosen lock nut
–
Adjust the play in the throttle cable by turning adjusting screw
Guideline
Throttle cable play
–
Tighten lock nut
M00731-10
–
Slide on sleeve
–
Check the clutch lever for smooth operation.
–
Move the handlebar to the straight-ahead position. Pull the clutch lever until resistance
is perceptible, and determine the play in the clutch lever
Clutch lever play
»
If the clutch lever play does not meet specifications:
–
Adjust the clutch cable play.
Note
S00681-10
Clutch damage If there is no play on the clutch lever, the clutch will begin to slip.
–
Before operating the motorcycle, always check the clutch lever play.
–
Move the handlebar to and fro over the entire steering range.
The clutch lever play must not change.
.
.
.
.
(
.
3... 5 mm (0.12... 0.2 in)
.
1... 3 mm (0.04... 0.12 in)
p. 151)
150
Advertisement
Table of Contents
