Mounting The Passenger Seat; Removing The Seat - KTM 125 Duke Owner's Manual
Hide thumbs
Also See for 125 Duke:
- Repair manual (267 pages) ,
- Owner's manual (194 pages) ,
- Setup instructions (22 pages)
Table of Contents
Advertisement
11
SERVICE WORK ON THE CHASSIS
11.6
Mounting the passenger seat
11.7
Removing the seat
–
Attach hooks
the rear while pushing forward.
–
Press down the passenger seat until it clicks into place.
Warning
Danger of accidents The passenger seat can come loose from the anchoring if it
is not mounted correctly.
–
B00724-10
–
Finally, check that the passenger seat is correctly mounted.
Preparatory work
–
Remove the passenger seat. (
Main work
–
Remove screws
–
Raise the rear of the seat, pull it towards the rear, and remove it upwards.
B00725-10
on the passenger seat to brackets
After mounting the passenger seat, check that it is locked correctly by
pulling up.
p. 80)
.
on the subframe, and lower it at
81
Advertisement
Table of Contents
