14
ELECTRICAL SYSTEM
14.6
Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover.
Finishing work
–
Mount the passenger seat. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
Main work
–
Remove expanding rivets
601915-10
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
p. 81)
.
131