Table of Contents
Advertisement
QQ
3 7 63 1515 0
Searching using the index function
The VCR automatically marks the tape with an index signal at the point where each
recording begins. Use these signals as references to find a specific recording.
1
Insert an indexed tape into the VCR.
Press ./> INDEX SEARCH.
2
• To search ahead, press > INDEX
SEARCH.
• To search backwards, press .
INDEX SEARCH.
The VCR starts searching, and playback
starts automatically from that point.
To stop searching
Press x STOP.
Notes
• No index signal will be added when recording starts from recording pause.
However, an index signal will be marked if you change the programme position
during recording pause.
• When you press . INDEX SEARCH, if there is nothing recorded before the
selected index signal, playback may not start exactly at the index signal.
TE
L 13942296513
80
Searching using the index function
About the Optimum Picture Control (OPC) function
The Optimum Picture Control (OPC)
function automatically improves recording
and playback quality by adjusting the VCR to
the condition of the video heads and tape. To
maintain better picture quality, we
recommend that you set OPC to ON in the
OPTIONS-1 menu (the OPC indicator lights
up in the display window). For details, see
page 84.
OPC playback
The OPC function automatically works on all types of tapes, including rental
tapes and tapes that were not recorded with OPC.
OPC recording
Whenever you insert a tape and start recording for the first time, the VCR
adjusts to the tape using the OPC function (the OPC indicator flashes
rapidly). This adjustment is retained until the tape is ejected.
To deactivate the OPC function
Set OPC to OFF in the OPTIONS-1 menu. The OPC indicator in the display
window turns off.
Tip
• To set tracking to the centre position, press the PROGRAM + and – buttons on the
VCR at the same time.
Notes
• You can adjust the tracking for an NTSC-recorded tape but the tracking meter
won't be displayed.
• With the Auto Long Play function on, the OPC function will work only in SP
mode. If the tape speed automatically switches from SP to LP, the OPC function
turns off. If, however, the entire programme is recorded in LP mode, the OPC
function will work.
• There is a delay of about ten seconds before the VCR actually starts recording
while the VCR analyses the tape. To avoid the delay, first set the VCR to recording
pause (the OPC indicator flashes slowly) and press z REC to have the VCR
analyse the tape (the OPC indicator flashes rapidly) and return to recording pause.
www
After the OPC indicator stops flashing, press X PAUSE to start recording
immediately.
If you want to start recording quickly without using the OPC function, first set the
VCR to recording pause (the OPC indicator flashes slowly) and press X PAUSE
again to start recording.
.
82
Adjusting the picture
http://www.xiaoyu163.com
INDEX
SEARCH
OPTIONS - 1
OPC
ON
EDIT
OFF
AUDIO MIX
OFF
HIFI AUDIO
NICAM
AUTO LONG PLAY
OFF
TAPE LENGTH
E1 8 0
COLOUR SYSTEM
AUTO
RETURN
SELECT :
SET
:
OK
EXIT :
MENU
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape (the
indicator flashes in the display window, then
turns off), distortion may occur if the
recording is in poor condition. In this case,
manually adjust the tracking.
During playback, press PROGRAM +/– on
the VCR to display the tracking meter. The
distortion should disappear as you press one
of the two buttons (the
indicator lights up).
To resume automatic tracking adjustments, eject the tape and re-insert it.
About the Reality Regenerator (RR) function
The Reality Regenerator function automatically restores the picture to its
original quality during playback.
To use the Reality Regenerator function
1
Press MENU, then select OPTIONS and press OK.
Press M/m to highlight OPTIONS-2, then press OK.
2
Press M/m to highlight RR, then press
3
OK.
Press M/m to set RR to NORMAL or HIGH, then press OK.
4
The RR indicator lights up in the display window.
5
Press MENU to return to the original screen.
To turn it off, select OFF in step 4. The RR indicator turns off in the display
window.
Q Q
3
6 7
1 3
Reducing the VCR's power consumption
You can turn off the indicators in the display window when the VCR is off (standby
mode) to reduce the VCR's power consumption.
1
Press MENU, then select OPTIONS and press OK.
Press M/m to highlight OPTIONS-2, then press OK.
2
Press M/m to select POWER SAVE, then
3
press OK.
Press M/m to highlight the option, then press OK.
4
For SLV-SE710N/K, SX710N/K, and SE810N/K:
• FULL to reduce the power consumption to a minimum.
• PARTIAL to reduce the power consumption.
For SLV-SE610N/K:
• ON to reduce the power consumption to a minimum.
5
Press MENU to return to the original screen.
To turn on the indicators in the display window
Set POWER SAVE to OFF in step 4.
Notes
• When the VCR stands by for recording, the indicators in the display window
remain lit even when POWER SAVE is set to FULL, PARTIAL, or ON.
• If POWER SAVE is set to FULL*, you cannot watch or record programmes from
your Canal Plus decoder, satellite, or digital tuner during standby mode (page 86).
* not available on SLV-SE610N/K
.
1-20
9 4
2 8
TRACKING
Tracking meter
OPTIONS - 2
DECODER / LINE3
DECODER
TIMER OPTIONS
VARIABLE
POWER SAVE
OFF
TV DIRECT REC
RR
NORMAL
RETURN
HIGH
OFF
SELECT
:
CONFIRM :
OK
EXIT :
1 5
0 5
8
2 9
9 4
continued
Adjusting the picture
OPTIONS - 2
DECODER / LINE3
DECODER
TIMER OPTIONS
POWER SAVE
FULL
TV DIRECT REC
PARTIAL
RR
OFF
RETURN
SELECT
:
CONFIRM :
OK
EXIT :
m
co
Reducing the VCR's power consumption
9 9
MENU
2 8
9 9
81
MENU
83
Hide quick links:
Advertisement
Table of Contents
