Sony SLV-SE610 Service Manual page 18

QQ
3 7 63 1515 0
Notes
• The DISPLAY information does not appear during still (pause) mode or slow-
motion playback.
• The DISPLAY information will not appear while playing an NTSC-recorded
tape.
• If a tape has portions recorded in both PAL (MESECAM) and NTSC systems, the
time counter reading will not be correct. This discrepancy is due to the difference
between the counting cycles of the two video systems.
• You cannot watch a Canal Plus programme while recording another Canal Plus
programme.*
• When you insert a non-standard commercially available tape, the remaining time
may not be correct.
• The remaining time is intended for rough measurement only.
• About 30 seconds after the tape begins playback, the tape remaining time will be
displayed.
• The station name* may not appear if the VCR does not receive station name
information signals.
* not available on SLV-SE610N/K
Recording what you are watching on the TV (TV Direct
Rec) (not available on SLV-SE610N/K)
If you use the SMARTLINK connection, you can easily record what you are
watching on the TV (other than tapes being played on the VCR).
1
Insert a tape with its safety tab in place.
Press z REC while you are watching a TV programme or external
2
source.
The VCR automatically turns on, then the TV indicator lights up and the
VCR starts recording what you are watching on the TV.
Tips
• The TV indicator appears in the display window after you press z REC in some
situations such as:
– when you are watching a source connected to the TV's line input, or
– when the TV tuner preset data for the programme position is different from the
data in the VCR tuner preset.
• If there is a tape with its safety tab in place in the VCR, the VCR automatically
turns on and starts recording what you are watching on the TV when you press
z REC.
• You can turn the TV Direct Rec function ON and OFF in the OPTIONS-2 menu
(see page 86).
TE
L 13942296513
48 Recording TV programmes
Recording TV programmes using the Dial
Timer
(SLV-SE810N/K only)
The Dial Timer function allows you to
make timer recordings of programmes
without turning on your TV. Set the
recording timer to record up to eight
programmes, including settings made
with other timer methods, that will be
broadcast within the next month. The
recording start time and recording stop
time can be set at one minute intervals.
Before you start...
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording
time.
• To record from a decoder, turn it on.
• Refer to "Index to parts and controls" for button locations.
1
Press DIAL TIMER.
DIAL TIMER
"DATE" and "TODAY" appear alternately in the display window.
If the date and time are not set, "DAY" will appear. See step 2 in the
following section, "To set the clock" to set the date and time.
2
DIAL TIMER Turn DIAL TIMER to set the recording date.
www
.
50
Recording TV programmes using the Dial Timer (SLV-SE810N/K only)
http://www.xiaoyu163.com
? ? ? ? /1 1 1 1
x
DIAL TIMER
X
PROGRAM +/–
VIDEO SP OPC
VIDEO SP OPC
VIDEO SP OPC
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Notes
• You cannot record what you are watching using this method when the VCR is in
the following modes; pause, timer standby, tuner preset, Auto Set Up, and
recording.
• When the TV indicator is lit in the display window, do not turn off the TV nor
change the TV programme position. When the TV indicator is not lit, the VCR
continues recording the programme even if you change the TV programme
position on the TV.
Q Q
3 6 7 1 3
3
DIAL TIMER Press DIAL TIMER.
"START" and the current time appear alternately in the display
window.
4
Turn DIAL TIMER to set the recording start time.
DIAL TIMER
You can set the recording start time in 15 minute intervals or adjust
the time in one minute intervals by pressing the PROGRAM +/–
buttons.
PROGRAM
5
DIAL TIMER Press DIAL TIMER.
"STOP" and the recording stop time appear alternately in the display
window.
6
DIAL TIMER Turn DIAL TIMER to set the recording stop time.
You can set the recording stop time in 15 minute intervals or adjust
the time in one minute intervals by pressing the PROGRAM +/–
buttons.
PROGRAM
.
Recording TV programmes using the Dial Timer (SLV-SE810N/K only)
1-12
9 4 2 8
1 5 0 5 8 2 9 9 4
Recording TV programmes
VIDEO SP OPC
VIDEO SP OPC
VIDEO SP OPC
VIDEO SP OPC
VIDEO SP OPC
m
co
VIDEO SP OPC
continued
9 9
2 8 9 9
49
51