Editing - Sony SLV-SE610 Service Manual

QQ
3 7 63 1515 0
Changing menu options
1
Press MENU, then select OPTIONS and
press OK.
Press M/m to highlight OPTIONS-1 or OPTIONS-2, then press OK.
2
Press M/m to select the option, then press OK.
3
Press M/m to change the setting, then press OK.
4
5
Press MENU to return to the original screen.
Menu choices
Initial settings are indicated in bold print.
OPTIONS-1
Menu option
OPC
EDIT
AUDIO MIX
TE
L 13942296513
84 Changing menu options
Menu option
POWER SAVE*
POWER SAVE*
TV DIRECT REC*
RR
Notes
• When the VCR stands by for recording, the indicators in the display window
remain lit even when POWER SAVE is set to FULL, PARTIAL or ON.
• With the EDIT option ON, the OPC function does not work.
1
* SLV-SE610N, SE710N, SX710N, and SE810N only
* 2 SLV-SE710N/K and SX710N/K only
* 3 SLV-SE810N/K only
* 4 not available on SLV-SE610N/K
* 5 SLV-SE610N/K only
www
.
86
Changing menu options
http://www.xiaoyu163.com
OPTIONS
OPTIONS - 1
OPTIONS - 2
RETURN
SELECT :
SET : OK
OPTIONS - 1
OPTIONS - 2
OPC ON
DECODER / LINE3
EDIT OFF
TIMER OPTIONS
AUDIO MIX OFF
POWER SAVE
HIFI AUDIO NICAM
TV DIRECT REC
AUTO LONG PLAY OFF
RR
TAPE LENGTH E 1 8 0
RETURN
COLOUR SYSTEM AUTO
RETURN
SELECT :
SELECT :
SET : OK
SET : OK
EXIT : MENU
Set this option to
• ON to switch on the OPC (Optimum Picture Control)
function and improve picture quality.
• OFF to switch off OPC.
• ON to minimize picture deterioration when editing.
• OFF to turn off EDIT.
• ON to listen to the hi-fi and normal audio tracks at the
same time. The AUDIO MONITOR button will not
function.
• OFF to listen to the hi-fi and normal audio tracks
separately. Select the sound using the AUDIO
MONITOR button.
• If you press Z EJECT, AUDIO MIX will be reset to
OFF. For details, see page 72.
Set this option to
4 • FULL to turn off the indicators in the display window
during standby mode to reduce the VCR's power
consumption to a minimum. For using the Line Through
function (page 18) or the decoder (page 39), select
PARTIAL or OFF.
• PARTIAL to turn off the indicators in the display
window to conserve the VCR's power.
• OFF to turn on the indicators in the display window
while the VCR is standing by.
5 • ON to turn off the indicators in the display window
during standby mode to reduce the VCR's power
consumption to a minimum.
• OFF to turn on the indicators in the display window
while the VCR is standing by.
• ON to activate the TV Direct Rec function.
4
• OFF to deactivate it.
• NORMAL for normal everyday use.
• HIGH for well-used video tapes such as rented tapes.
Select this option when NORMAL does not improve the
picture quality.
• OFF to switch off the Reality Regenerator function.
x ao
y
i
http://www.xiaoyu163.com
8
Menu option
HIFI AUDIO*
AUTO LONG PLAY • ON to change the timer recording tape speed
EXIT : MENU
TAPE LENGTH
DECODER
VARIABLE
OFF
ON
NORMAL
COLOUR SYSTEM
EXIT : MENU
OPTIONS-2
Menu option
DECODER/
LINE2*
DECODER/
LINE3*
TIMER OPTIONS*
Q Q
3 6 7 1 3

Editing

Connecting to a VCR or stereo system
How to connect to record on this VCR
Connect the line outputs of the other VCR to the LINE IN connector or jacks
of this VCR. Refer to the examples A through C and choose the connection
that best suits your VCR.
Example A
Your VCR (Recorder)
: Signal flow
Example B
Your VCR (Recorder)
t LINE-2 L o t
t t
(open cover to connect)
u163
VMC-820HG audio/video cable (not supplied)
: Signal flow
.
1-21
2 9 9 4 2 8
Set this option to
1 • NICAM to record NICAM broadcasts on the hi-fi audio
track.
• STANDARD to record standard sound on the hi-fi audio
track.
For details, see page 70.
automatically to the LP mode when the remaining tape
length becomes shorter than the recording time. Note
that for AUTO LONG PLAY to work correctly, the
TAPE LENGTH setting must be accurate.
• OFF to keep the set tape speed.
• E180 to use an E-180 or shorter type tape.
• E195 to use an E-195 type tape.
• E240 to use an E-240 type tape.
• E300 to use an E-300 type tape.
• AUTO to set the colour system automatically.
• PAL to play back a tape recorded in the PAL colour
system.
• MESECAM to play back a tape recorded in the
MESECAM colour system.
If you press Z EJECT or turn the VCR off, COLOUR
SYSTEM will be reset to AUTO.
Set this option to
• DECODER to use the DECODER/LINE-2 IN
2 connector as the Canal Plus decoder connector.
• LINE2 to use the DECODER/LINE-2 IN connector as
the line input connector.
• DECODER to use the DECODER/LINE-3 IN
3 connector as the Canal Plus decoder connector.
• LINE3 to use the DECODER/LINE-3 IN connector as
the line input connector.
4 • VARIABLE to display the TIMER METHOD menu for
selecting STANDARD or SHOWVIEW when pressing
the TIMER button.
• STANDARD to display the TIMER menu when pressing
the TIMER button.
• SHOWVIEW to display the SHOWVIEW menu when
pressing the TIMER button.
For details, see page 55 and 59.
1 5 0 5 8 2 9 9 4
i LINE-1 (TV)
Other VCR (Player)
VMC-2121HG Scart cable (not supplied)
o R
o o
m
LINE OUT
co
Other VCR (Player)
Connecting to a VCR or stereo system
9 9
2 8 9 9
continued
Changing menu options 85
TV
Scart
(EURO-AV)
TV
continued
87