Sony SLV-SE610 Service Manual page 25

QQ
3 7 63 1515 0
To assign a memory number after recording
After recording a programme, you can store the programme information as a new
memory before ejecting the cassette. However, you cannot add the memory on the
existed memory bank number. To store the memory as additional, select the memory
bank number before.
Press ?/1 to turn on the VCR.
1
2
Press SMART SEARCH.
3
Press SMART SEARCH again.
The SMART SEARCH -SAVE- screen
appears.
Press </, to select a memory bank
4
number.
Select the memory bank number with no
information or the memory bank number
to be deleted.
To cancel the process, select CANCEL.
5
Press OK.
To exit the SMART SEARCH screen
Press SMART SEARCH.
Note
• If you select a number that is already contains programmes, the old programme
information is cleared and the new programme information is stored.
TE
L 13942296513
76 Storing, searching and deleting programme information (Smart Search Plus)
To exit the SMART SEARCH screen
Press SMART SEARCH.
Recalling the most recent programme information
Programme information that is not saved in one of the memory bank
numbers is erased when the cassette is ejected. The RECALL memory bank
will temporarily memorize the programme information of the last tape used
for recording in case that it is accidentally ejected.
If you re-insert the cassette in step 1 that you accidentally ejected and then
select RECALL in step 3, the data for the last tape used to record
programmes appears. Press OK and the latest information will appear on the
SMART SEARCH screen. You can then add new information to this
programme list. For an explanation about viewing programme information
without using one of the memory banks, see page 73.
If you want to erase the latest information in the RECALL memory bank,
press the SMART SEARCH button instead of the OK button in step 3 and
then close the SMART SEARCH screen. The new information will replace
all of the current information in the RECALL memory bank.
Note
• When you insert the cassette whose information does not exist on the memory
bank number, you cannot search the recorded programme.
Deleting the programme information
You can delete the programme information stored in a memory number.
Before you start...
• Turn on your TV and the VCR.
• Set the TV to the video channel.
1
Press SMART SEARCH.
The SMART SEARCH -RECALL-
screen appears.
www
Press </, to select the memory bank
2
number to delete.
The programme information on the
selected memory bank number appears.
Check the information that you want to
delete.
.
78
Storing, searching and deleting programme information (Smart Search Plus)
http://www.xiaoyu163.com
SMART SEARCH
DATE TIME
2 9 . 9 1 4 : 0 0 1 5 : 0 0
3 0 . 9 2 0 : 0 0 2 1 : 0 0
1 . 1 0 6 : 3 0 7 : 0 0
BLANK TIME
SELECT :
SET : OK
SAVE :
SMART SEARCH -SAVE-
CANCEL 1 2
DATE TIME
2 9 . 9 1 4 : 0 0 1 5 : 0 0
3 0 . 9 2 0 : 0 0 2 1 : 0 0
1 . 1 0 6 : 3 0 7 : 0 0
SELECT :
SET : OK
EXIT :
SMART SEARCH -SAVE-
CANCEL 1 2
DATE TIME
2 9 . 9 1 4 : 0 0 1 5 : 0 0
3 0 . 9 2 0 : 0 0 2 1 : 0 0
1 . 1 0 6 : 3 0 7 : 0 0
SELECT :
SET : OK
EXIT :
SMART SEARCH -RECALL-
RECALL 1 2
DATE TIME
2 . 1 0 1 8 : 0 0 1 9 : 0 0
4 . 1 0 2 1 : 3 0 2 3 : 0 0
SELECT :
SET : OK
EXIT :
SMART SEARCH -RECALL-
RECALL 1 2
x ao u163
DATE TIME
y
2 9 . 9 1 4 : 0 0 1 5 : 0 0
3 0 . 9 2 0 : 0 0 2 1 : 0 0
1 . 1 0 6 : 3 0 7 : 0 0
SELECT :
i
SET : OK
ERASE : CLEAR
EXIT :
http://www.xiaoyu163.com
2 9
8
Searching for programme information stored on the memory bank
number
You can start playback of the recorded programme after call the programme
information from the four memory bank numbers.
Before you start...
• Turn on your TV and set it to the video channel.
1
Insert the cassette for which you want to use the memory bank number.
1 8 0 MIN.
PROG.
FGH
The VCR automatically turns on.
AAB
I J K
2
Press SMART SEARCH.
The SMART SEARCH -RECALL-
3 0 MIN.
screen appears.
SMART SEARCH
3 4
PROG.
Press </, to select the memory bank
FGH 3
AAB
I J K
number for the inserted cassette.
The programme information contained in
the selected memory bank number
SMART SEARCH
appears.
When you selected wrong memory bank
3 4
number, eject the cassette and repeat
PROG.
steps from step 1.
FGH
AAB
I J K
4
Press OK.
The selected memory bank number
appears on the SMART SEARCH screen.
SMART SEARCH
Press M/m/</, to select the programme you want to start viewing.
5
6
Press OK.
The VCR starts searching, and playback starts automatically from the
beginning of the selected programme.
To stop searching
Press x STOP.
Q Q
3 6 7 1 3 1 5
Storing, searching and deleting programme information (Smart Search Plus)
3
Press CLEAR.
The programme information is deleted.
4
Press SMART SEARCH.
The SMART SEARCH screen disappears.
Note
• You cannot use or return the deleted information.
About the Demonstration Mode
The Smart Search Plus function has a Demonstration Mode that allows the user, such
as a salesperson, to automatically display the Smart Search Plus screens.
To activate the Demonstration Mode
While the VCR is turned on, press and hold the both x (stop) and A (eject)
buttons on the VCR for a few seconds. The demonstration will start and the
four kinds of Smart Search Plus screens will be displayed repeatedly. If you
operate the VCR, the Demonstration Mode temporarily stops. After about
five minutes, the demonstration will restart.
To cancel the Demonstration Mode
While the VCR is turned off, press and hold the both x (stop) and A (eject)
buttons on the VCR for a few seconds. You can also cancel the
Demonstration Mode if you turn the power off and unplug the mains lead.
3 4
PROG.
CDE
I J K
SMART SEARCH
3 4
co
PROG.
FGH
AAB
I J K
.
SMART SEARCH
Storing, searching and deleting programme information (Smart Search Plus)
1-19
9 4 2 8
SMART SEARCH -RECALL-
RECALL 1 2
DATE TIME
2 . 1 0 1 8 : 0 0 1 9 : 0 0
4 . 1 0 2 1 : 3 0 2 3 : 0 0
SELECT :
SET : OK
EXIT :
SMART SEARCH -RECALL-
RECALL 1 2
DATE TIME
2 9 . 9 1 4 : 0 0 1 5 : 0 0
3 0 . 9 2 0 : 0 0 2 1 : 0 0
1 . 1 0 6 : 3 0 7 : 0 0
SELECT :
SET : OK
ERASE : CLEAR
EXIT :
Memory bank number
SMART SEARCH
DATE TIME
2 9 . 9 1 4 : 0 0 1 5 : 0 0
3 0 . 9 2 0 : 0 0 2 1 : 0 0
1 . 1 0 6 : 3 0 7 : 0 0
BLANK TIME
SELECT :
SET : OK
EXIT :
0 5 8 2 9 9 4 2 8
SMART SEARCH -RECALL-
RECALL 1 2
DATE TIME
NO DATA
SELECT :
SET : OK
EXIT :
m
9 9
3 4
PROG.
CDE
I J K
SMART SEARCH
3 4
PROG.
FGH
AAB
I J K
SMART SEARCH
1 8 0 MIN. 2
PROG.
FGH
AAB
I J K
3 0 MIN.
SMART SEARCH
9 9
continued
77
3 4
PROG.
SMART SEARCH
79