Hall Adjustment; Max Gain Adjustment; Ccd Output 2Ch Matching Adjustment; Ccd Output 2Ch Matching Adjustment (1) - Sony Handycam DCR-PC115 Service Manual

DCR-PC115/PC115E/PC120BT/PC120E

4. MAX GAIN Adjustment

Setting the minimum illumination.
If it is not consistent, the image level required for taking subjects
in low illuminance will not be produced (dark).
Subject
Adjustment Page
Adjustment Address
Note1: Shoot the clear chart with the zoom WIDE end. And adjust the
direction of the camera so that the chart is located in the center of
the screen.
Note2: This adjustment should be carried out upon completion of the MR
adjustment.
Switch setting:
1) POWER .................................................................. CAMERA
2) NIGHT SHOT .................................................................. OFF
Adjusting method:
Order Page Address Data
1 0 01
2 6 96
3 6 97
4 6 01
5 6 02
Note3: The adjustment data will be automatically input to page: F, address:
1B
Processing after Completing Adjustments
Order Page Address Data
1 6 96
2 6 97
3 6 01
4 0 01
RadarW RadarW RadarW RadarW RadarW
Clear chart (Approx. 1m from the front
of the lens) Note1
F
1B
Procedure
01 Set the data.
00 Set the data.
Set the following data.
2A: DCR-PC115/PC120BT (NTSC)
1F: DCR-PC115E/PC120E (PAL)
6F Set the data, and press PAUSE
button.
Check that the data changes to
"01". (Note3)
Procedure
00 Set the data.
00 Set the data.
00 Set the data, and press PAUSE
button.
00 Set the data.

5. CCD Output 2ch Matching Adjustment

5-1. CCD Output 2ch Matching Adjustment (1)

Correct the dispersion of the black level between the left-right
channels of the CCD imager.
Subject
Adjustment Page
Adjustment Address
Note1: Check that the data of page: 6, address: 02 is "00". If not, to page:
6, address: 01, set data: 00, and press the PAUSE button.
Note2: This adjustment should be carried out upon completion of the
following adjustments.

HALL adjustment

MAX GAIN adjustment
Switch setting:
1) POWER .................................................................. CAMERA
2) NIGHT SHOT .................................................................. OFF
Adjusting method:
Order Page Address Data
1 0 01
2 6 2C
3 6 40
4 F 1E
5 F 1F
6 6 01
7 6 02
Note3: The adjustment data will be automatically input to page: F, address:
7C, 7D.
Processing after Completing Adjustments
Order Page Address Data
1 6 01
2 0 01
3
5-18
RadarW RadarW RadarW
Arbitrary
F
7C, 7D
Procedure
01 Set the data.
01 Set the data.
01 Set the data.
00 Set the data, and press PAUSE
button.
00 Set the data, and press PAUSE
button.
73 Set the data, and press PAUSE
button.
Check that the data changes to
"01". (Note3)
Procedure
00 Set the data, and press PAUSE
button.
00 Set the data.
Perform "CCD Output 2ch
Matching Adjustment (2)".