Camera System Adjustments; Hall Adjustment - Sony CCD-TRV138 Manual

1-3.

CAMERA SYSTEM ADJUSTMENTS

Before perform the camera system adjustments, check that the
specified values of "28 MHz Origin Oscillation Adjustment", "LINE
OUT Level Adjustment" of "VIDEO SYSTEM ADJUSTMENT"
are satisfied.
Check that the data of page: 0, address: 10, is "00".
If not, select page: 0, address: 10, and set data "00"

1. HALL Adjustment

For detecting the position of lens iris, adjust the hall AMP gain
and offset.
Mode
Subject
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
Specified value
Note 1: Check that the data of page: 0, address: 10 is "00".
Note 2: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Note 3: The right two digits of the page: 1 displayed data of the
adjusting remote commander.
1:00:XX
Adjusting method:
Order Page Address Data
1 0
2 6
3 6
4 6
5 6
6 6
Note 4: The adjustment data will be automatically input to page:
F, address: 12 to 18.
Checking method:
Order Page Address Data
1 6
2 0
3 6
4 1
5 6
6 1
CCD-TRV138/TRV238E/TRV338/TRV438E
RadarW RadarW RadarW RadarW RadarW
CAMERA
Not required
Displayed data of page: 1 (Note 3)
Adjusting remote commander
F
12 to 18
87 to 8B during IRIS OPEN
15 to 19 during IRIS CLOSE
Displayed data
Procedure
01 01
94 89
95 17
01 6D Press PAUSE button. (Note 4)
Check the data changes to
02
"01".
01 00 Press PAUSE button.
Procedure
Check that the data is "00" or
0C
"10".
03 03
01 01 Press PAUSE button.
Check that the displayed data
(Note 3) during IRIS OPEN
satisfied the specified value.
01 03 Press PAUSE button.
Check that the displayed data
(Note 3) during IRIS CLOSE
satisfied the specified value.
Processing after completing adjustment:
Order Page Address Data
1 6 01
2 6 94
3 6 95
4 0 03
5 0 01
6-11
Procedure
00 Press PAUSE button.
00
00
00
00