Board - Sony Handycam DCR-PC115 Service Manual

2-4. FJ-035 BOARD
2 Two claws
4 Harness
(PT-128) (16P)
PRECAUTION DURING
HARNESS (PT-128) INSTALLATION
The harness (PT-128) is pulled when the LCD
panel is opened and is loosened when closed.
When the harness (PT-128) is going to be
inserted into the connector on the FJ-035 board
and when hooking the two claws of the rigid
portion of the FJ-035 board, perform these
works while the LCD panel is opened.
FJ-035 board
Harness (PT-128)
2 Battery terminal board
(Note)
3 FJ-035 board,
DC-IN connector
(Note)
FJ-035 board
Battery terminal

board

DC-IN connector
1 FP-387 flexible board
(6P)
3 FJ-035 board
3 MS flexible
sheet
5 BT terminal
retainer
1 Battery terminal board (3P)
(Note)
Note:
CN1335 (for the DC-IN connector) and CN1334 (for the battery terminal board)of
FJ-035 board are the same size, and the number of the pins is the same.
So these connectors may be mistaken for each other. When these connectors
are mistaken, the charge system of the unit may break.
So ascertain the color of the connector when assembling these connectors.
CN1334
(Blue)
CN1335 (White)
DCR-PC115/PC115E/PC120BT/PC120E
PRECAUTION DURING RIGID PORTION
OF FJ-035 BOARD INSTALLATION
Attach the FJ-035 board so that the
harness (PT-128) is routed under the
rigid portion of the FJ-035 board.
1 BT cable sheet
qs FJ-035 board
Battery terminal
7
board
Two screws
4
(M1.7 × 2.5),
lock ace, p2
Two screws
6
(M1.7 × 2.5),
lock ace, p2
CN1334 (for the battery terminal board) ········ Blue
CN1335 (for the DC-IN connector) ················· White
2-7
Harness
(PT-128)
Rigid portion
of FJ-035 board
2 Lens
rubber (R)
Screw
9
(M1.7 × 2.5),
lock ace, p2
q; DC retainer
plate
qa DC-IN
connector
Screw
8
(M1.7 × 2.5),
lock ace, p2