Sony Handycam DCR-PC115 Service Manual page 84

[SERVICE POSITION TO CHECK THE CAMERA SECTION]
Connection to Check the Camera Section
If you have remove the Cabinet (L), set the camera to the "Forced camera power ON" mode to check the camera section.
Operate the camera functions of the zoom and focus using the adjustment remote commander (with the HOLD switch set in
the OFF position).
Setting the "Forced Camera Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01 and
press the PAUSE button of the adjustment remote
commander.
Harness (PT-128)
Connect it when you want
to monitor the signal on the
LCD screen.
Adjustment remote
commander (RM-95)
DC-IN connector
AC power
AC IN
adaptor
VC-270 board
(16P)
FJ-035 board
(88P)
DCR-PC115/PC115E/PC120BT/PC120E
Exiting the "Forced Camera Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
button of the adjustment remote commander.
3) Select page : 0, address: 01, and set data: 00.
Cabinet (R)
CD-349 board
(72P)
This connection
must be made
(88P)
Connect it when you
want to monitor the
signal on the monitor
TV.
Mechanism deck
2-15
Lens assembly
VM-027 board
EVF block assembly
Control switch block
(FK-1850)
Cabinet (L)
(51P)
Monitor
TV