6-17-3 SD memory card Status Display
The status display enables a confirmation of the SD memory
card formatted condition, available memory capacity etc.
From the menu bar, select PROPERTY
DEVICES
SD
CARD.
If the format is compatible with SD standards, the message "SD
STANDARD: SUPPORTED" is displayed.
If the format is not compatible with SD standards, the message
"SD STANDARD: NOT SUPPORTED" is displayed. If this is the
case, writing or reading will not be successful. Format the card
with the AJ-SPX800P.For more on formatting SD memory cards,
see [6-15 Formatting SD memory cards].
6-17-4 Confirmation of Metadata Upload
The contents of the metadata upload file that is read from the SD
memory card can be checked.
From the menu bar, select PROPERTY
DEVICES
META
DATA. The following screen appears:
For more information on each item, see [6-12 Setting of Clip
Meta Data].
The META NAME is the meta data name written in the meta data
upload file, and is not recorded in the clip.
6-17-5 Video Encoder Card Status Display
(optional)
Attaching the video encoder card (AJ-YAX800G, optional),
select PROPERTY
DEVICES
PROXY from the menu bar.
The number of the slot in which the video encoder card is
inserted is displayed.
Downloaded From VideoCamera-Manual.com Manuals
90