Panasonic AJ-SPX800P Operating Instructions Manual page 72

Hide thumbs Also See for AJ-SPX800P:
Table of Contents

Advertisement

This completes the white shading adjustment.
The compensation values are stored in the non-volatile internal
memory. Therefore, re-adjusting the white shading is not
required, even after the camera-recorder power has been turned
off.
Storing the Lens File Data
The white shading compensation values can be stored in the
internal memory as lens file data.
Selecting the File number
1
Activate the MENU and go to the FILE page to open the
<LENS> screen. Turn the JOG Dial to move the cursor to
the item FILE NO.
2
Press the JOG Dial button and FILE NO. will start blinking.
Turn the JOG Dial button to select the desired lens file (1-8)
to be stored.
3
Press the JOG Dial button to confirm the lens file.
Adding a Title to the Selected File No.
4
Turn the JOG Dial button to move the cursor to [TITLE:].
5
Press the JOG Dial button. The cursor moves to the title
input field, and input mode is enabled.
Downloaded From VideoCamera-Manual.com Manuals
72
6
Press the JOG Dial button again and turn it until a desired
letter for the title appears.
Turning the JOG Dial button changes the letter displayed in
the following sequence:
Space:
Alphabetical characters:
Numerals:
Symbols:
7
Press the JOG Dial button to confirm the letter.
8
Turn the JOG Dial button to move the cursor to the next
position (to the right), and repeat Steps
letters for the title. (Up to 12 letters)
9
When the title input is completed, turn the JOG Dial button
to move the cursor to the [:] position.
10
Press the JOG Dial button. The cursor returns to [TITLE:].
11
Turn the JOG Dial button to move the cursor to [WRITE:].
12
Press the JOG Dial button and the following message
appears.
13
Turn the JOG Dial button to move the cursor to [YES].
Then, press the JOG Dial button.
[WRITE OK] will appear after writing is completed,
indicating that the set data and the title have been stored in
the lens file area of the camera's internal memory.
14
Press the MENU button to exit the menu operation.
A to Z
0 to 9
', >, <, /, -
6
7
to
to set the

Advertisement

Table of Contents
loading

Table of Contents