Error message
SCSI device is not
responded.
Status Display does not
exist.
winaspi.dll is not found.
Care and Maintenance
Possible cause
Printer is not
responding.
KX-P8410 software is
not installed correctly.
SCSI board is not
correctly set.
Recovery
Click Yes or No on the
message window.
Yes: Printer cannot be
used. Turn off the
printer and the
computer, then turn
them on again.
No: Waits until the printer
responds.
Reinstall the KX-P8410
software.
Correctly set the SCSI
board in the computer.
(Refer to the instructions
manual of the SCSI
board.) For any other
trouble related to SCSI,
refer to the SCSI section of
Care and Maintenance
(
P.
127).
141