Panasonic KX-P8410 Operating Instructions Manual page 110

Care and Maintenance
110
2
# Hold the fuser as shown below, and slide it out of the printer.
Safety Caution:
B The fuser unit weighs approximately 3.1 k g {6.8 lbs.}. Take care when handling
it.
$ Close the front door.
Remove the oil supply roll:
3
# Press out on tabs to unlock the oil supply roll.
$ Remove the oil supply roll out of the fuser.
#
Note:
B If the paper is not jammed in the fuser unit, perform the following.
# Repeat steps 1 to 4 of Jam B on
$ Skip step 4 and go to step 5.
$
#
page 108.
#
$