Scsi - Panasonic KX-P8410 Operating Instructions Manual

SCSI

If trouble occurs when printing using SCSI, confirm that the ASPI Manager is
installed. If the ASPI Manager is not installed, you must install it. It is assumed that
the Adaptec SCSI host adapter is installed.
Windows 3.1 users
Confirm that the SCSI host adapter is installed in your PC
1
correctly.
In CONFIG.SYS file, check the following setting.
2
DEVICE = ASPInDOS.SYS (n = 2, 4, 8 etc.)
If this setting does not exist in CONFIG.SYS, reinstall SCSI driver
using EZ-SCSI (refer to the SCSI host adapter users manual).
Confirm that the EZ-SCSI is installed in Windows 3.1. If Adaptec
3
EZ-SCSI program group does not exist, install SCSI driver using
EZ-SCSI (refer to SCSI host adapter users manual).
After finishing necessary procedure, restart PC and make sure
4
that the following message appears on your PC.
"ASPInDOS.SYS Installation successful"
Start Windows and confirm that the printer is recognized by PC
5
using SCSI utility in EZ-SCSI program group or Show
configuration in KX-P8410 Utilities program group.
If the printer is not recognized, please recheck SCSI ID or
terminator settings.
Care and Maintenance
127