Other Features; Set The Alarm Timer; Set The Sleep Timer; Listen To An External Device - Philips BTM5120 User Manual

6 Other features

Set the alarm timer

This unit can be used as an alarm clock. You can
select CD, FM, or USB as the alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER for more than two seconds.
» A source for selection (CD, FM, or
USB) is displayed and begins to blink.
2
Press PRESET/ALBUM
to select the alarm source.
3
Press SLEEP/TIMER to confirm.
» The hour digits are displayed and begin
to blink.
4
Repeat steps 2-3 to set the hour, minute,
and adjust volume.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press SLEEP/TIMER repeatedly to activate
•
or deactivate the alarm.
» If timer is activated,
Tip
•
If CD/USB source is selected, but no disc is placed or
no USB connected, the system switches to the tuner
source automatically.
EN
12
/ repeatedly
is displayed.

Set the sleep timer

• To set the sleep timer, in turn on mode,
press SLEEP/TIMER repeatedly to select a
set period of time (in minutes).
» When sleep timer is activated,
displayed. Otherwise,

Listen to an external device

You can listen to an external device through this
unit with a 3.5mm audio cable or RCA cables.
Listen through a 3.5mm audio cable
AUDIO IN
AUDIO IN
1
Press AUX/AUDIO IN repeatedly to
select AUDIO IN source.
2
Connect the3.5mm audio cable between:
• the AUDIO IN socket (3.5 mm) on
the unit,
• and the headphone jack
on an external device.
3
Start to play the device (see the device
user manual).
is
disappears.