Listen To The Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips BTM5120 User Manual

5 Listen to the
radio

Tune to a radio station

Tip
•
Position the antenna as far as possible from TV, or other
radiation sources.
•
For optimal reception, fully extend and adjust the
position of the antenna.
1
Press CD/FM repeatedly to select the FM
source.
2
Press and hold
seconds.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station:
• Press / repeatedly until you find
optimal reception.
Program radio stations
automatically
Note
•
You can program a maximum of 20 preset radio
stations (FM).
In tuner mode, press and hold PROG
•
for more than two seconds to activate
automatic programming.
» All available stations are programmed
in the order of waveband reception
strength.
» The first programmed radio station is
broadcast automatically.
/ for more than two
Program radio stations
manually
1
Tune to a radio station.
2
Press PROG, and then press PRESET/
ALBUM
/ to select a number from
1 – 20.
3
Press PROG to confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat steps 2-3 to program more
stations.
Note
•
To overwrite a programmed station, store another
station in its place.

Select a preset radio station

In tuner mode, press PRESET/ALBUM
•
to select a preset number.

Display RDS information

RDS (Radio Data System) is a service
that allows FM stations to transfer
additional information. If you tune to an
RDS station, an RDS icon is displayed.
1
Tune to an RDS station.
2
Press RDS/DISPLAY repeatedly to scroll
through the following information (if
available):
» Program service
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» Radio text message
» Mono/Stereo
» Time
/
EN 11