Table of Contents
Advertisement
7 Other features
Set the alarm timer
This unit can be used as an alarm clock. You
can select DISC, USB, or TUNER as the alarm
source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER for three seconds.
2
Press
/
repeatedly to select an
alarm source (DISC, USB,or TUNER)
3
Press SLEEP/TIMER to confirm.
» The hour digits begin to blink.
4
Repeat steps 2-3 to set the hour, minute,
and adjust volume of the alarm.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press SLEEP/TIMER repeatedly to view
•
the alarm information and activate or
deactivate the alarm.
» If the timer is activated,
[TIMER](Timer) is displayed.
» If the timer is deactivated, [TIMER
OFF] (timer off) is displayed and
[TIMER](Timer) disappears.
Tip
•
If the DISC/USB source is selected, but no disc is placed
or no USB connected, the system switches to the tuner
source automatically.
EN
14
Set the sleep timer
•
To set the sleep timer, when the unit
is switched on, press SLEEP/TIMER
repeatedly to select a set period of time
(in minutes).
[SLP 120]
•
•
[SLP 90]
[SLP 60]
•
•
[SLP 45]
[SLP 30]
•
•
[SLP 15]
[SLP OFF]
•
» When the sleep timer is activated,
[SLEEP] (sleep)is displayed. Otherwise,
[SLEEP] (sleep) disappears.
Listen from an external
device
You can listen to an external device through this
unit with an audio cable.
1
Press USB/AUDIO IN repeatedly to select
the AUDIO IN source.
2
Connect an audio cable (not supplied)
between:
the AUDIO IN socket (3.5 mm) on
•
the unit;
•
and the headphone socket on an
external device.
3
Start to play music on the connected
device (see the device user manual).
Advertisement
Table of Contents
