Table of Contents
Advertisement
6 Other features
Set the alarm timer
This unit can be used as an alarm clock. You can
select DISC, TUNER, or USB as alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER for three seconds.
» [SET TIMER] is displayed, and then
[DISC] is displayed and begins to blink.
2
Press
/
(
select an alarm source (DISC, TUNER, or
USB).
3
Press SLEEP/TIMER (or OK) to confirm.
» The hour digits are displayed and begin
to blink.
4
Repeat steps 2-3 to set hour, minute, and
adjust volume of the alarm.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press SLEEP/TIMER repeatedly to view the
alarm information and activate or deactivate the
alarm.
» If timer is activated,
» If timer is deactivated, [TIMER OFF] (timer
off)is displayed and
Tip
•
If DISC/USB source is selected, but no disc is placed
or no USB connected, the system switches to tuner
source automatically.
EN
20
/
) repeatedly to
is displayed.
disappears.
Set the sleep timer
To set the sleep timer, in turn on mode, press
SLEEP/TIMER repeatedly to select a set period
of time (in minutes).
» When sleep timer is activated,
displayed. Otherwise,
Listen to an external device
You can listen to an external device through this
unit with an audio cable.
1
Press SOURCE repeatedly to select
AUDIO IN source.
2
Connect an audio cable (not supplied)
between:
• the AUDIO IN (L and R) sockets on
the back of the unit;
• and the headphone jack on the
external audio device.
3
Start to play the device (see the device
user manual).
STANDBY
EJECT
SOURCE
DISPLAY
SOURCE
SUBTITLE/
PRESET
OK
AUDIO/
PRESET
SOUND
1
2
3
4
5
6
7
8
9
0
MENU
RDS
OPTION
PROG
TIME
CLOCK SET
SLEEP
is
disappears.
SUB OUT
SPEAKER OUT
VIDEO AUDIO IN
HDMI
L
R
AUDIO IN
Advertisement
Table of Contents
