Figure 4-44 Configuring The Working Mode Of A Lan Port - Huawei HG8240 Service Manual

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual

Figure 4-44 Configuring the working mode of a LAN port

Step 4 Configure the parameters of the WAN interface.
1.
2.
Issue 02 (2011-01-26)
NOTE
l When X_HW_L3Enable is set to 0, it indicates that the corresponding LAN port works in the L2
mode.
l When X_HW_L3Enable is set to 1, it indicates that the corresponding LAN port works in the L3
mode.
By default, X_HW_L3Enable is set to 0.
Choose InternetGatewayDevice > WANDevice > 1 > WANConnectionDevice from the
navigation tree. Click Add in the lower left part to create an instance.
Choose 2 > WANPPPConnection from the navigation tree and click Add in the lower left
part. Choose the new 1 branch from the navigation tree. In the right pane, set parameters
as follows:
l Set Enable to 1, indicating that the WAN connection is enabled.
l Set Connection Type to IP_Routed, indicating that the connection type of the WAN
interface is in routing mode.
l Set NATEnable to 1, indicating that the NAT function is enabled.
l Set Username to iadtest@pppoe and Password to iadtest, indicating that the PPPoE
user name is iadtest@pppoe and the password is iadtest.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Service Configuration Examples
4-57