Security - Huawei HG8240 Service Manual

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
Parameter
Hide Broadcast
WMM Enable
Authentication Mode
Encryption Mode

3.3.5 Security

This topic describes how to configure the IP address filter, MAC address filter, DoS, and ONT
access control through the Web page.
Issue 02 (2011-01-26)
Description
Indicates whether to enable or hide broadcast.
l If the option box is not selected, it indicates that the SSID
broadcast function is enabled. The ONT periodically
broadcasts the SSID, that is, the name of the wireless
network. In this way, any STA can search for the wireless
network.
l If the option box is selected, it indicates that the SSID
broadcast function is disabled. The SSID is hidden, and the
STA cannot search for the wireless network. The SSID can
be obtained only through a request.
Indicates whether to enable the QoS of the wireless network.
After the function is enabled, the video and voice QoS can be
improved.
Indicates the authentication mode for the STA to request access
to the wireless network. The mode can be Open, Shared, WPA
Pre-Shared Key, WPA2 Pre-Shared Key, WPA Enterprise,
WPA2 Enterprise, or Wi-Fi Protected Setup.
It is set to open by default, that is, the STA can access the network
without authentication.
Indicates the encryption mode for the STA to request access to
the wireless network. The encryption mode and encryption
parameters vary with the authentication mode.
l If the authentication mode is set to Open, the encryption
mode can be set to None or WEP.
l If the authentication mode is set to Shared, the encryption is
WEP.
l If the authentication mode is set to WPA Pre-Shared Key,
WPA2 Pre-Shared Key, WPA Enterprise, or WPA2
Enterprise, the encryption mode can be set to AES, TKIP,
or TKIP&AES.
l If the authentication mode is set to Wi-Fi Protected Setup,
WPS Mode must be set to Pin or Push-button.
NOTE
l Pin indicates the pin-based encryption.
l Push-button indicates the push-button-based encryption.
When WPS Mode is set to Push-button, press the WPS button on
the ONT and press the WPS icon included with the STA within two
minutes, or run the WPS setup program in the STA to install the WPS
software.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration Guide
3-19