Table of Contents
Advertisement
HUAWEI NetEngine 8000 F
Hardware Guide
3.6.2 Breakout Boxes
3.6.2.1 Product Overview
Positioning
Breakout boxes are used to flexibly allocate bandwidth resources to routers. They
cooperate with a breakout optical module and optical jumper to convert an MPO
interface into multiple LC interfaces to facilitate fiber layout.
Product Features
●
●
●
Usage Scenario
The breakout function applies to a scenario where bandwidth resources are
unevenly allocated between two routers at different levels. In comparison with
breakout fibers, breakout boxes implement the following functions:
●
●
Figure 3-78 Breakout box cabling
3.6.2.2 10-Port-MPO-12-40-Port-LC-Breakout Box(single-mode)
Appearance
Figure 3-79 10-Port-MPO-12-40-Port-LC-Breakout Box(single-mode)
Issue 05 (2023-03-31)
NO TE
Characters in the brackets indicate the BOM number and official name that are separated
using a slash ("/") in the [
LC interfaces support automatic dust-proof covers, and MPO interfaces
support dust-proof plugs.
In comparison with breakout fibers (MPO-LC fibers), breakout boxes feature
more flexible fiber layout.
There is no restriction on the installation direction of breakout boxes, so that
the breakout boxes can be installed positively or negatively as needed.
Increase the density of fiber layout.
Shorten the cabling distance.
Copyright © Huawei Technologies Co., Ltd.
BOM number / Official name ] format.
3 Hardware Description
342
Advertisement
Table of Contents
