Priority Plus Scan Mode - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
set the interval for priority scan checks. If
For more information about key operation and other specifics about Priority Scan mode,
see Priority
To enter Priority Scan mode on the
To enter Priority Scan mode on the BCD996XT, press PRI while
scanning.
To enter Priority Scan mode on the BCT15X, FUNCTION + press POL/
PRI while scanning.
If no conventional channels in enabled and unlocked systems are designated as priority,
the scanner will display Priority Scan No Channel.
For trunked priority channels, you need to enable priority scanning in the system option
menu as well as tagging the channel as priority. Trunked priority only works while
scanning that system's control channel or (in the case of Motorola systems) when the
scanner is scanning any channel in the system.

Priority Plus Scan mode

The scanner stops the current operation and only performs Priority Scan checks as
described above.
To enter Priority Plus Scan mode on the
To enter Priority Plus Scan mode on the BCD996XT, while scanning
repeatedly press PRI until the scanner displays Priority Mode Plus On.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (5 of 8)4/7/2009 10:08:47 AM
Scan.
1. Enter Hold mode.
2. FUNCTION + tap NO.
1. Enter Hold mode.
2. FUNCTION + repeatedly tap NO until the scanner displays
Priority Mode Plus On.
BCD396XT or BC346XT:
BCD396XT or BC346XT: