Uniden BCD996XT User Manual page 29

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html
None
Lockout
Available operations
Delete a
frequency
Programming a system for Scanning
Once you create the system and at least 1 site, you can
if you want to
Create at least 1 channel group
Each Motorola system can contain up to 20 channel groups, and any system you want to scan must
contain at least 1 channel group.
1. On the
2. Go to the
3. If you need to change any of the channel group properties, you can do that now. Unless a
property is Required , you can operate the system without changing the default settings.
Channel group properties
(All of these options can be found by selecting the group name under the
necessary, the sub-menu and the exact option name are listed beside each property.)
Required
Recommended
Optional
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (6 of 7)4/7/2009 10:08:28 AM
Optional
Set Lockout
Delete
Frequency
Scan the system, you'll need to program the required elements in following order:
Program System menu, select the system you just created.
Edit Group menu and select New Group .
None
Name (Edit
Quick key (Set Quick
Location information
Lockout (Set
Search
Name)
Key)
(Set LocationInfo)
Lockout)
the system with no problems. However,
Edit Group menu. If