Create At Least 1 Channel In Each Group; Channel Properties - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html
Name
Quick key
Optional
Location
information
Lockout
Available operations
Delete a group

Create at least 1 channel in each group

Each conventional system can contain up to 1000 channels in each group, and all groups must contain at least 1 channel.
1. On the Edit Group
2. Go to the Edit Channel
3. Input the frequency for this channel in MHz.
4. If you need to change any of the channel properties, you can do that now. Unless a property is Required , you can operate
the system without changing the default settings.

Channel properties

(All of these options can be found by selecting the channel name your scanner's
and the exact option name are listed beside each property.)
Property
Frequency
Analog/digital
CTCSS/DCS
P25 Network Address (NAC)
Modulation
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html (3 of 4)4/7/2009 10:08:2
Edit Name
Set Quick Key
Set Location
Info
Set Lockout
Delete Group
menu, select the channel group you just created.
menu and select New Channel .
Required
Edit Frequency
Recommended
BCD396XT and BCD996XT:
BC346XT and BCT15X: Not available
Set CTCSS/DCS
BCD396XT and BCD996XT:
only)
BC346XT and BCT15X: Not available
Set Modulation
Edit Channel
Option name
Set Audio Type
(BCD396XT: analog channels only)
P25 NAC Option
5 AM
menu. If necessary, the sub-menu
(digital channels