Close Call Mode; Key Operation In Close Call Only Mode - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.html

Close Call mode

To determine whether the information on this page applies to your scanner,
see the tags at the bottom of the page.
When the scanner is in Close Call mode, it performs a close call check every 2 seconds.
The scanner switches to the selected bands and searches for unusually strong signals
(indicating the transmitter is probably somewhere close by). After the close call check, the
scanner returns to its previous function.
In Close Call Do Not Disturb mode, the scanner does not perform a Close Call check if it
is already receiving an audio transmission. This prevents the audio from cutting out every 2
seconds.
In Close Call Only mode, the scanner only performs Close Call checks.
The Close Call
can change the overall Close Call options through the

Key operation in Close Call Only mode

Turn the SELECT-VOLUME-SCROLL knob to resume searching.
FUNCTION + tap MENU to go to the Close Call menu.
Key Name
(2nd
operation)
Action on:
Tap
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.html (1 of 3)4/7/2009 10:09:03 AM
menu lets you change the operation settings of the Close Call feature. You
Hold (Close
Call)
When the Disable the Close Call band associated with this key.
scanner detects a
Close Call hit:
Enter Hold
mode.
Srch/CloCall Opt
2 (Search 2)
1 (Search 1)
Tap again to enable.
menu.
3 (Search 3)