Quick Keys; Startup Keys; Search Keys - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/UsingQuickKeysStartupKeysAndSearchKeys.html
Using Quick Keys, Startup Keys, and

Search Keys

The different shortcut keys have different functions:

Quick Keys

Quick keys let you enable and disable systems and channel groups (disabled
systems and channel groups are ignored during scans).
You must be in Scan mode to use Quick Keys.
System Quick Keys (SQKs) let you enable or disable systems, sites or search
ranges: just enter the SQK from the number pad.
Group Quick Keys (GQKs) let you enable or disable channel groups inside the
current system: Tap FUNCTION , then enter the GQK from the number pad.

Startup Keys

Startup Keys let you lock and unlock several systems, sites, and search ranges all
at the same time.
When you activate a Startup Key, the scanner unlocks all systems, sites, and
search ranges that are assigned to that same Startup Key; the scanner also locks
all systems, sites, and search ranges that are assigned to a different Startup Key.
To activate a Startup Key, press & hold the number key while you power the
scanner on.
Search Keys
Search Keys let you quickly start one of 3 programmed searches.
To start the search assigned to a Search Key, FUNCTION + tap that Search Key.
This page applies to the following scanner(s):
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Docum...idenManBeta/UsingQuickKeysStartupKeysAndSearchKeys.html4/7/2009 10:09:00 AM
BCD996XT BCT15X BCD396XT