Create A Site; Site Properties; Create At Least 1 Frequency; Frequency Properties - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.html
Name
Number tag
Automatic Gain Control
(AGC)
Delay time
Copy a system
Delete a system

Create a site

Each EDACS SCAT system must contain exactly 1 site.
1. On the Program System
2. Go to the Edit Site menu.
3. If you need to change any of the site properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings.

Site properties

All of these options can be found under your scanner's
Property Option name
Required
None
Recommended
Set Quick Key
Quick key
Optional
Set Attenuator
Attenuator
Set Hold Time
Hold time
Set Location
Location
information Info
Set Lockout
Lockout
Set Modulation
Modulation
Set Startup Key
Startup key
Available operations
None

Create at least 1 frequency

Each EDACS SCAT system must contain at least 1 frequency in its site.
1. Open the Edit Site menu.
2. Go to the Set Frequencies
3. Enter at least 1 frequency for this site.
4. If you need to change any of the frequency properties, you can do that now. Unless a property is Required , you can operate the system without changing the default
settings.

Frequency properties

All of these options can be found by selecting the frequency under the
the property.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.html (2 of 3)4/7/2009 10:08:25 AM
Edit Name
Set Number Tag
Optional
BCD396XT or BCD996XT: Set Audio AGC
BC346XT or BCT15: Not available
Set Delay Time
Available operations
Copy System
Delete System
menu, select the system you just created.
Edit Site menu. If necessary, the sub-menu and option name on each scanner are listed beside the property.
sub-menu and select New Frequency .
Set Frequencies sub-menu. If necessary, the sub-menu and option name on each scanner are listed beside