Using Tone-Out Mode; Key Operation In Tone Out Mode - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html
*digital scanners only

Using Tone-Out Mode

To start a Tone-Out search:
1. Tap MENU .
2. Scroll down and select Tone-Out for...
3. Select Tone-Out Standby to start the search.
The scanner starts searching the most recently-used Tone-Out channel (and any
other Tone-Out Channels that have the same frequency).
If you want to search a different channel, just turn the SELECT-VOLUME-
SCROLL knob until you find the channel you want.
To exit Tone-Out mode, tap SCAN .

Key operation in Tone Out Mode

Turn the SELECT-VOLUME-SCROLL knob to change the channel.
FUNCTION + tap MENU to go to the Tone-Out for... menu.
Key Name
(2nd
operation)
Action On
Tap
FUNCTION
+ Tap
FUNCTION
+ Press &
hold
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html (2 of 4)4/7/2009 10:09:01 AM
HOLD (Close
Call)
Enter Hold mode
(the scanner
opens squelch).
Toggle Close
Call modes.
Enter Close Call
Only mode.
2 (Search 2)
1 (Search 1)
Enter the number on the key.
Start the search range assigned to this Search Key.
NA
3 (Search 3)
NA NA