Table of Contents
Advertisement
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.html
Programming a P25 System
To program a P25 system, you'll need to program the required elements in following order:
Create a system
1. Go to the
2. The scanner will prompt you for the System Type. Select P25 .
3. The scanner will prompt you for the sub-type. Select Standard trunk .
4. When the scanner prompts you confirm, tap YES .
5. The scanner creates the system with a default name. Select
6. If you need to change any of the system properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
System properties
All of these options can be found under your scanner's
menu and option name on each scanner are listed beside the property.
Property
None
Name
Number tag
Automatic Gain Control (AGC)
Delay time
ID format
ID scan/search
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (2 of 7)4/7/2009 10:08:29 AM
Create at least 1 channel in each group
Channel properties
Program System
menu and choose New System .
Edit Name
Edit Sys Option#Set Number Tag
BCD396XT:
BC346XT: Not available
Edit Sys Option#Set Delay Time
Edit Sys Option# Set ID Format (DEC/HEX) or (AFS/DEC)
Edit Sys Option#ID Scan/Search
Program System
Option name
Required
Recommended
Optional
Edit Sys Option#Set Audio AGC
Edit Name
if you want to change it.
menu. If necessary, the sub-
Hide quick links:
Advertisement
Table of Contents
