Correcting The Data - Olympus DS 30 Instructions Manual

CORRECTING THE DATA

Press the SELECT button to switch to the data correction status to
adjust year-month-day and
Press the SELECT button until the
indication you want to change
1.
starts blinking.
Do not press the buttons with a mechanical
pencil or similar pointed instrument.
50 Note: As you press the SELECT button, the blinking indication changes in the order of year, month, day,
hour, minute and ":" (second). Data correction ends when you press the mode button again.
QD models only
day-hour-minute.
Press the SET button to correct
2.
the data.
If you press the button once, the number on the
display will advance by 1. If you hold the button
down, the numbers will run in rapid succession.