Sg17F6584 - Back - Lorex SG17F6584 Instruction Manual

SG17F6584 - Back

4. DVR / VCR AUDIO AND VIDEO IN - Use with A/V cables (not supplied) to receive audio and
video from an external source (DVR/VCR)
5. DVR / VCR AUDIO AND VIDEO OUT - Use the A/V cables (not supplied) to send audio and
video from the monitor to a DVR/VCR
6. ALARM FUNCTION TERMINALS (INPUT/OUTPUT) - These terminals are used to connect
external alarm devices such as a motion sensor or door/alarm sensor.
7. IMPEDANCE SWITCH (75ohm / High) - When the BNC camera input is used for looping Video
Output (to connect to a DVR/VCR), set this switch to HIGH.
8. ETHERNET PORT - Connects the monitor to a router for connection to the internet. Refer to
the Network Connectivity Instructions on Page 25 for Remote Connection.
4 5 6 7
SG17F6584 - Back
8
15