Lorex SG17F6584 Instruction Manual page 12

SG17F6584 - Front
SG17F6584 - Front
8. PIP BUTTON - Display a main camera image with secondary camera
sub-images:
• PIP (Picture In Picture) allows you to view two locations simultaneously,
one being the main channel, and the other being viewed as small
image on the screen. To change the PIP location, see Menu Controls
on Page 21.
9. SEQ BUTTON - This function is used to Sequence between all camera locations in Full Screen
and QUAD modes in sequential order. The letters SEQ will appear in the on-screen display
during sequencing and QUAD MODE display.
• To change Sequence settings through the MENU, refer to Page 21.
To exit Sequence Mode, Press the SEQ button again.
10. ZOOM BUTTON - This monitor is equipped with 2 times digital ZOOM. To utilize this feature,
proceed as follows:
• Set the monitor to Full Screen mode or Quad mode for the desired location
• Press the ZOOM button. ZOOM mode is now active
• Use the SHUTTLE (JOG) CONTROL knob on the front of the Observation System to move
the area being captured in 2x ZOOM MODE. Press the SHUTTLE CONTROL ENTER button
to activate ZOOM Mode.
• To exit ZOOM MODE, press the ZOOM button again.
12
8 9 10
PIP MODE