Vocal Effects - DigiTech vocalist live fx Owner's Manual

Vocal Effects

The "Vocal" effects processing section comes after the Gold Channel effects
processing section and comprises the following 7 effect modules: Pitch FX,
Distortion/Filter, Harmony, Double, Modulation, Delay, and Reverb. Unlike the Gold
Channel effects, Vocal effect settings are independently stored to each preset.
To bypass/enable a Vocal effect module:
1. Press the corresponding effect button (e.g., <Pitch FX>, <Dist/Filter>,
etc.). When the effect button is lit, the corresponding effect is enabled. When
the effect button is not lit, the corresponding effect is bypassed.
2. If you wish to store the Vocal effect's newly enabled or bypassed state, press the
<Store> button and perform the preset storing procedure. See
for further information on storing user presets.
page 24
To edit Vocal effect settings:
1. Press and hold the effect button for the effect which you would like to edit (e.g.,
<Harmony>, <Modulation>, etc.). The effect button will begin flashing and
the LCD display will now display the selected effect's parameters.
2. Start singing into the microphone or use the Sound Check feature (see
Check" on page 18
<Edit> knobs to adjust the various parameters for the effect. Some effects
have multiple effect "Types" to select from (for example, Modulation has chorus,
flange, etc.). For these effects, turn the <DATA> encoder to change the effect
Type.
3. When finished, press the flashing effect button to exit the effect's Edit mode.
4. To store the changes, press the <Store> button and perform the preset
storing procedure. See
storing user presets.
16
for further information). Turn the corresponding
"Presets" on page 24
for further information on
Owner's Manual
"Presets" on
"Sound