Presets - DigiTech vocalist live fx Owner's Manual

Presets

The Live FX has 99 user presets and 99 factory presets. The type of preset loaded
can be identified by the letter preceding the preset number in the LCD display. For
example, "U01" would signify "User" preset 1 and "F04" would signify "Factory"
preset 4. From the factory, the user and factory presets are identical. The difference
is that factory presets cannot be overwritten and user presets are meant to be
overwritten. You can load and edit either a user or factory preset as a starting point
and then store it to a user preset location.
Any changes made to effect parameters must be stored to a user preset to be
retained. Changing these parameters will cause the Store button to light, indicating
that changes have been made to the preset and must be stored. If the preset is
changed or the unit is powered down before the changes have been stored, the
changes will be lost.
Presets can be selected using either the DATA encoder or the Up/Down
footswitches. Using the DATA encoder allows for quick navigation through presets,
while using the Up/Down footswitches navigate one preset at a time and provide
hands-free control.
Navigating between the user and factory presets is straightforward. When user
preset 99 is reached, advancing to the next preset up will select the first preset
of the factory preset bank. And when factory preset 99 is reached, advancing up
will select the first preset of the user preset bank. The same type of preset bank
navigation occurs when navigating downward through presets.
To select a preset with the DATA encoder:
1. From Preset mode (this is the normal operating mode), rotate the <DATA>
encoder clockwise to move up through presets.
2. Rotate the <DATA> encoder counter-clockwise to move down through
presets.
NOTE: Presets can load automatically or manually using the DATA encoder. See
"Preset Load" on page 33
To select a preset with the UP/DOWN footswitches:
1. Press the <Up> footswitch to select the next preset up.
2. Press the <Down> footswitch to select the next preset down.
NOTE: Pressing and holding the <Up> or <Down> footswitches will perform
secondary functions assigned to these footswitches, as indicated by the screening
on the chassis.
24
for more information on this feature.
Owner's Manual